BLACK JACK BITUMENT & FLASHING PRIMER 1L

90201

BLACK JACK BITUMENT & FLASHING PRIMER 1L

Everbuild 902 1 Litre Bitumen Primer a thin black primer used to give a key prior to applying bitumen paints and roof coatings and as a primer prior to applying any flashing tape system. Benefits & uses Fast drying, Suitable for use with all bituminous surface coatings mainly used for priming concrete roofs, floors, cementicious screeds, renders, Bitumen felt, asphalt, mastic Weathered corrugated iron, steel and wood. Limitations: Do not use in areas where subsequent solvent contact is likely, avoid inhalation of vapours in confined spaces. allow sufficient drying time before over coating. Surface Preparation: Preparation of the surface all surfaces must be sound, stable and thoroughly clean and dry. Metal surfaces should be wire brushed to remove rust, can be applied over red lead or zinc phosphate Remove tar based paint systems before use. New galvanised surfaces should be roughened with a wire brush or treated with a proprietary etch primer, fibre cement or rag felt apply generously to saturate the surface. Approximate Coverage: 4 to 6 meters Square per litre depending on porosity of substrate, 11 meters square per litre on non porous surfaces

£10.90

Tax included. Shipping calculated at checkout.

Quantity
  • 7 In stock

BLACK JACK BITUMENT & FLASHING PRIMER 1L

£10.90